BMT AUTOMATIC SEALING ROBOTS
Published in Glass Insulating Machines
MACHINE FEATURES
The outlet rack is divided in two parts which enables on piece of glass being sealed while other is waiting on the final outlet rack to be unloaded. This gives a better production capacity. Touch screen on the control panel. Special design using V shape blocks on outlet conveyer system which has low wear and tear and very easy to clean. This also facilitates for finished unit to be unlcaded by special fork system which can go under the glass unit in between these V blocks. This enables glass unit not to slip Glass thickness is measured along with spacer bar gap at this point immediately after the unit comes out from the panel press line. The spacer bar thickness gives a signal to the sealing robot how much flow rate of silicon to be kept while sealing. This flow rate comes from the recipe which is stored in the PLC software
TECHNICAL DATA
 
   
Sitemap | About Us | Careers | Terms & Conditions | Contact Us Copyright © 2013 Bassra. All Rights Reserved.