BMT AUTOMATIC GLASS CUTTING LINES

Published in Glass Cutting Machines

MECHINE FEATURES

Very Robust Structure made up of thick and heavy Metal, protected by Powder coating Paint (chemical cleaning, primer and powder coating), for good finish and rust-prevention for many years. Double Side Loading Station to load from racks at each side. Options available to have tracks to load two or three racks on each side. Accurately flat and carpet padded wooden table surface. The wooden board used is special thick board made to order for this machine. This gives a long life and smooth straight surface to the table for good cutting quality. The Machine Control Program controls all parameters mentioned below to have excellent and constant cutting quality and a good glass breakout.

Cutting pressure, Acceleration and Deceleration, Speed Oil start and stop Head movement Head up and down
Special solenoid valve for lubrication control, allocated close to the cutting wheel, proper for high evaporating oils use. Automatic Cutting pressure adjustment when you choose glass thickness to cut Special PC used with following features
Data transfer via USB Key Wide screen Remote Access Control software Fast Intel Processor with high capacity RAM and storage disk Wireless internet facility to use Wifi in the factory Anti Virus Software included
Axis controlled Servo Motors and drives are used in the machine for high speed and accuracy.. Motors are Brushless. Wheel replacement is eased by the shape design of the machine and is carried out in a few seconds. Movement transfer and measuring with gears (rack and pinion system) facing downwards which has advantage of impurities not depositing between teeth. Power full air cushion for better flotation of bigger and heavy sheets. This will reduce friction and enables easy handling of glass Can choose from XY ( Straight Cutting ) or XYC ( Shape Cutting ) Laser scanner system with electronic positioning (option) Laser scanner system for shaped glasses ( option) Automatic safety system against cutting head falling off the glass Straight and shape glass cutting feature ( can choose from straight cutting or shape cutting model) Low-E Edge Deletion system for straight and shape glass ( option) Double zero for cutting of Laminated glass. Automatic Glass transfer from Loading Table to Cutting Table by transport belts. Pneumatic controlled breaker bars with foot paddle at each side to operate from any side.Strong and heavy construction of the machine. OPTIMA Optimiser Programme is available with the machine in various options of languages and features. You can choose an option of having your own Auto CAD drawings of any shapes to cut from the machine through CAD Way (Optional) or use from library from EDIT Way( Optional) Man-machine dialogue simple and intuitive owing to a software interface which takes into account all the glassmaker’s requirements. The Operator is trained in very easy way so that he can remember all instructions. Retraining programs can also be done online with remote access feature of the machine. Safety limit switches are positioned on each squaring block and on the glass sheet supports to prevent the movement of the bridge and the carriage if nothing is re-entered Safety Sensors on all 4 side of cutting table to avoid any accidents if any worker just enters the area when machine is working then machine stops automatically. Electrical system compliant with general safety rules
TECHNICAL DATA



DOWNLOADS

Please Click here to download Brochure.pdf